Formaldehyde Exposure Racial Disparities in Southeast Texas.

Formaldehyde (HCHO) exposures during a full year were calculated for different race/ethnicity groups living in Southeast Texas using a chemical transport model tagged to track nine emission categories. Petroleum and industrial emissions were the largest anthropogenic sources of HCHO exposure in Southeast Texas, accounting for 44% of the total HCHO population exposure. Approximately 50% of the HCHO exposures associated with petroleum and industrial sources were directly emitted (primary), while the other 50% formed in the atmosphere (secondary) from precursor emissions of reactive compounds such as ethylene and propylene. Biogenic emissions also formed secondary HCHO that accounted for 11% of the total population-weighted exposure across the study domain. Off-road equipment contributed 3.7% to total population-weighted exposure in Houston, while natural gas combustion contributed 5% in Beaumont. Mobile sources accounted for 3.7% of the total HCHO population exposure, with less than 10% secondary contribution. Exposure disparity patterns changed with the location. Hispanic and Latino residents were exposed to HCHO concentrations +1.75% above average in Houston due to petroleum and industrial sources and natural gas sources. Black and African American residents in Beaumont were exposed to HCHO concentrations +7% above average due to petroleum and industrial sources, off-road equipment, and food cooking. Asian residents in Beaumont were exposed to HCHO concentrations that were +2.5% above average due to HCHO associated with petroleum and industrial sources, off-road vehicles, and food cooking. White residents were exposed to below average HCHO concentrations in all domains because their homes were located further from primary HCHO emission sources. Given the unique features of the exposure disparities in each region, tailored solutions should be developed by local stakeholders. Potential options to consider in the development of those solutions include modifying processes to reduce emissions, installing control equipment to capture emissions, or increasing the distance between industrial sources and residential neighborhoods.

Evaluation of the adsorption performance and thermal treatment-associated regeneration of adsorbents for formaldehyde removal.

Indoor air pollution remains a major concern, with formaldehyde (HCHO) a primary contributor due to its long emission period and associated health risks, including skin allergies, coughing, and bronchitis. This study evaluated the adsorption performance and economic efficiency of various adsorbents (biochar, activated carbon, zeolites A, X, and Y) selected for HCHO removal. The impact of thermal treatment on adsorbent regeneration was also assessed. The experimental apparatus featured an adsorption column and HCHO concentration meter with an electrochemical sensor designed for adsorption analysis. Zeolite X exhibited the highest adsorption performance, followed by zeolite A, zeolite Y, activated carbon, and biochar. All adsorbents displayed increased HCHO removal rates with an extended length/diameter (L/D) ratio of the adsorption column. Zeolite A demonstrated the highest economic efficiency, followed by zeolite X, activated carbon, zeolite Y, and biochar. Higher L/D ratios improved economic efficiency and prolonged the replacement cycle (the optimal timing for adsorbent replacement to maintain high adsorption performance). Sensitivity analysis of adsorbent regeneration under varying thermal treatment conditions (150, 120, and 80°C) and durations (60, 45, and 30 min) revealed minimal changes in adsorption efficiency (±3%). The results indicated the potential of adsorbent regeneration under energy-efficient thermal treatment conditions (80°C, 30 min). In conclusion, this study underscores the importance of a comprehensive assessment, considering factors such as adsorption performance, replacement cycle, economic efficiency, and regeneration performance for the selection of optimal adsorbents for HCHO adsorption and removal.Implications: This study underscores the importance of adsorption technology for the removal of formaldehyde and similar volatile organic compounds (VOCs), highlighting the potential of alternative adsorbents, such as environmentally friendly biochar, in addition to traditional strategies, such as activated carbon and zeolites. Our findings demonstrate the feasibility of adsorbent regeneration under energy-efficient thermal treatment conditions. These results hold promise for improving indoor air quality, reducing environmental pollutants, and enhancing responses to air contaminants like fine dust and VOCs.

HPLC and GC Characterization of Dicliptera bupleuroides Aerial Parts and Evaluation of Its Anti-Inflammatory Potential in Vitro, in silico and in Vivo Using Carrageenan and Formalin Induced Inflammation in Rat Models.

The current study aimed to evaluate the anti-inflammatory activity of Dicliptera bupleuroides Nees aerial parts methanol extract and its different fractions namely hexane, chloroform, ethyl acetate and butanol in vitro using cyclooxygenase inhibitory assay (COX-2). In vivo anti-inflammatory evaluation was performed using carrageenan and formalin induced inflammation in rat models followed by molecular docking. High performance liquid chromatography (HPLC) and gas chromatography coupled with mass chromatography (GC/MS) analyses were used for chemical analyses of the tested samples. The tested samples showed significant inhibition in COX-2 inhibitory assay where methanol extract (DBM) showed the highest inhibitory potential at 100 µg/mL estimated by 67.86 %. At a dose of 400 mg/kg, all of the examined samples showed pronounced results in carrageenan induced acute inflammation in rat model at 4th h interval with DBM showed the highest efficiency displaying 65.32 % inhibition as compared to the untreated rats. Formalin model was employed for seven days and DBM exhibited 65.33 % and 69.39 % inhibition at 200 and 400 mg/kg, respectively approaching that of the standard on the 7th day. HPLC revealed the presence of caffeic acid, gallic acid and sinapic acid, quercetin and myricetin in DBM. GC/MS analysis of its hexane fraction revealed the presence of 16 compounds belonging mainly to fatty acids and sterols that account for 85.26 % of the total detected compounds. Molecular docking showed that hexadecanoic acid followed by decanedioic acid and isopropyl myristate showed the best fitting within cyclooxygenase-II (COX-II) while nonacosane followed by hexatriacontane and isopropyl myristate revealed the most pronounced fitting within the 5-lipoxygenase (5-LOX) active sites. Absorption, metabolism, distribution and excretion and toxicity prediction (ADMET/ TOPKAT) concluded that most of the detected compounds showed reasonable pharmacokinetic, pharmacodynamic and toxicity properties that could be further modified to be more suitable for incorporation in pharmaceutical dosage forms combating inflammation and its undesirable consequences.

Pharmacological insights into Chukrasia velutina bark: Experimental and computer-aided approaches.

BACKGROUND: Chukrasia velutina is an enthnomedicinally used plant reported to have significant medicinal values. The present study aimed to explore the pharmacological activities of bark methanol extract using in vitro, in vivo and in silico models. METHODS: The study was designed to investigate the pharmacological effects of methanol extract of Chukrasia velutina bark (MECVB) through in vitro, in vivo and in silico assays. Analgesic activity was tested using formalin-induced nociception and acetic acid-induced writhing assays while the antipyretic effect was tested using yeast-induced hyperthermia in mice model. The antioxidant effect was tested using the DPPH and reducing power assay and the cytotoxic screening was tested using the brine shrimp lethality bioassay. In addition, in silico studies were conducted using computer aided methods. RESULTS: In the acetic acid-induced writhing assay, the extract showed 28.36% and 56.16% inhibition of writhing for doses of 200 and 400 mg/kg, respectively. Moreover, a dose-dependent formalin-induced licking response was observed in both early and late phase. In yeast-induced pyrexia, the MECVB exhibited (p < 0.05) antipyretic effect. The extract demonstrated an IC50 value of 78.86 µg/ml compared with ascorbic acid (IC50 23.53 µg/ml) in the DPPH scavenging assay. The compounds sitosterol, 5,7-dimethoxycoumarin and scopoletin were seen be effective in molecular docking scores against COX-I (2OYE), COX-II (6COX) and human peroxiredoxin 5 (1HD2). In ADME/T analysis, 5,7-dimethoxycoumarin and scopoletin satisfied Lipinski's rule of five and thus are potential drug candidates. CONCLUSION: The bark of Chukrasia velutina showed significant analgesic and antipyretic properties and is a potential source of natural anti-oxidative agents.

Phytochemical Characterization, Antioxidant and Anti-Inflammatory Effects of Cleome arabica L. Fruits Extract against Formalin Induced Chronic Inflammation in Female Wistar Rat: Biochemical, Histological, and In Silico Studies.

In recent decades, the use of herbs and plants has been of great interest, as they have been the sources of natural products, commonly named as bioactive compounds. In specific, the natural compounds from the Capparaceae family which has been proved to have antioxidant, anti-inflammatory, antimicrobial and anti-carcinogenic activities, by several studies. Cleome arabica L. (CA) specie is the most used medicinal plants in Tunisia and elsewhere in North African countries for treatment of various diseases including diabetes, rheumatism, inflammation, cancer, and digestive disorders. The current work was undertaken to estimate the total phenolic, flavonoid and condensed tannin contents, to identify and quantify the polyphenolic compounds, and to evaluate the antioxidant and the anti-inflammatory proprieties of CA fruits extract against formalin induced chronic inflammation in Female Wistar rats. In fact, the antioxidant activity was tested by Diphenyl-1-Picrylhydrazyl free radical scavenging (DPPH), Ferric reducing antioxidant power (FRAP) and Nitric Oxide radical (NO·). Anti-inflammatory effect of fruits extract was examined using formalin (2%) induced paw edema in rats. Molecular docking tools were used to investigate the interaction of some compounds from CA fruits extract with the cyclooxygenase-2 (COX-2) target protein. Our results showed that, the total phenolic, flavonoid and tannins contents, which were assessed by the Folin-Ciocalteu, Quercetin, and Catechin methods, respectively, were 230.22 mg gallic acid equivalent/g dry weight (mg GAE/g DW), 55.08 mg quercetin equivalent/g dry weight (QE/g DW) and 15.17 mg catechin equivalents/g dry weight (CatE/g DW), respectively. HPLC analysis revealed the presence of five polyphenolic compounds whose catechin was found to be the most abundant compounds. The antioxidant activity of extract was quantified by DPPH, FRAP and NO· tests and IC50 reached the values of 3.346 mg/mL, 2.306 and 0.023 mg/mL, respectively. Cleome fruits ameliorated the histological integrity of the skin and alleviated the disruptions in hematological parameters (WBC, LYM, RBC, and HGB), inflammatory cytokines (IL-1ß, IL-6, TNF-α), C-reactive protein, and some oxidative stress markers (TBARS (-49%) and AOPP (-42%) levels, SOD (+33%) and GPx (+75%) activities, and GSH (+49%) content) induced by formalin injection. Moreover, the in-silico investigation had shown that CA fruits extract compounds have a stronger interaction with COX-2 active site, more than the reference drug "indomethacin" (two H-bonds). Our research gives pharmacological backing to the healthcare utilization of Cleome plant in the treatment of inflammatory diseases and oxidative harm.

N, P-co-doped carbon dots as a dual-mode colorimetric/ratiometric fluorescent sensor for formaldehyde and cell imaging via an aminal reaction-induced aggregation process.

Novel colorimetric and ratiometric fluorometric dual-mode N, P-co-doped carbon nanodots, BPEI-CDs, for highly sensitive and selective detection of formaldehyde (FA) were successfully prepared from N-(phosphonomethyl)iminodiacetic acid (PMIDA) and branched polyethyleneimine (BPEI). The treatment of FA caused a remarkable linear enhancement of ratiometric fluorescence (F501 nm/F408 nm) in a wide range of 0-40 µM with a detection limit (LOD) of 0.47 µM (3σ/k), along with distinct color changes from colorless to light yellow. Mechanistic study shows that this electron-rich system, formed by the cooperative roles of N and P, promoted the FA-induced Schiff bases formation reaction, which contributed to the CD aggregation-induced emission (AIE) "turn-on" response and enhancement of π-conjugation-induced bathochromic behaviors. Furthermore, N, P-co-doped BPEI-CDs were successfully applied to the determination of FA in bean sprout samples. Using the standard addition method, the recoveries ranged from 96.9 to 101.8%, and the relative standard deviation (RSD) was in the range 2.23 to 3.21%. The application for intracellular FA sensing further verified that this novel nanoprobe may offer a new venue for the design of simple, low-cost, and sensitive biosensors. Graphical abstract.

An Endeavor in the Reaction-Based Approach to Fluorescent Probes for Biorelevant Analytes: Challenges and Achievements.

The promising features of fluorescence spectroscopy have inspired a quest for fluorescent probes for analysis and monitoring of molecular interactions in biochemical, medical, and environmental sciences. To overcome the competitive supramolecular interactions in aqueous media encountered with conventional molecular-recognition-based probes, the use of reaction-based probes that involve making or breaking of covalent bonds has emerged as a complementary sensing strategy to realize higher selectivity and sensitivity with larger spectroscopic changes. In spite of the enormous efforts, the development of reaction-based fluorescent probes meets with certain challenges in terms of their practical applications, demanding "intelligent design" of probes with an appropriate fluorophore attached to an efficient reactive moiety at the right place. This Account summarizes the results of our efforts made in the development and fine-tuning of reaction-based fluorescent probes toward those goals, classified by the type of analyte (anions, metal cations, and biomolecules) with notes on the challenges and achievements. The reaction-based approach was demonstrated to be powerful for the selective sensing of anions (cyanide and (amino)carboxylates) for the first time, and later it was extended to develop two-photon probes for bisulfite and fluoride ions. The reaction-based approach also enabled selective sensing of noble metal ions such as silver, gold, and palladium along with toxic (methyl)mercury species and paramagnetic copper ions. Furthermore, microscopic imaging and monitoring of biologically relevant species with reaction-based two-photon probes were explored for hydrogen sulfide, hypochlorous acid, formaldehyde, monoamine oxidase enzyme, and ATP.

Roles of reactive oxygen species and antioxidant enzymes on formaldehyde removal from air by plants.

The roles of enzymatic reactions and redox reactions caused by reactive oxygen species (ROS) in formaldehyde metabolism in tomatoes and wheat seedlings and the changes in peroxidase (POD) and catalase (CAT) activities in plants were investigated. Differences in the breakdown of added formaldehyde between fresh and boiled plant extracts were determined to calculate the contributions of different removal mechanisms. Two plant seedlings efficiently removed formaldehyde from air when its level varied from 0.65 to 1.91 mg m-3; meanwhile, the maximum rate at which tomato seedlings transported formaldehyde from air to the rhizosphere solution reached 182.26 µg h-1 kg-1 FW (fresh weight). Metabolism in plants was mainly responsible for the formaldehyde dissipation. The enzymatic contribution to formaldehyde dissipation decreased with increasing shoot exposure time or air formaldehyde level, while the redox contribution increased in importance because of an increasing level of ROS. The different enzymatic antioxidant activities of plants resulted in different levels of ROS and hence different tolerance and removal efficiencies toward formaldehyde. The self-enhancing ability of plants to remove formaldehyde via redox reactions suggested that the formaldehyde removal efficiency could be enhanced by plant adaptation to environmental stress.

Emissions from Electronic Cigarettes: Assessing Vapers' Intake of Toxic Compounds, Secondhand Exposures, and the Associated Health Impacts.

E-cigarettes likely represent a lower risk to health than traditional combustion cigarettes, but they are not innocuous. Recently reported emission rates of potentially harmful compounds were used to assess intake and predict health impacts for vapers and bystanders exposed passively. Vapers' toxicant intake was calculated for scenarios in which different e-liquids were used with various vaporizers, battery power settings and vaping regimes. For a high rate of 250 puff day-1 using a typical vaping regime and popular tank devices with battery voltages from 3.8 to 4.8 V, users were predicted to inhale formaldehyde (up to 49 mg day-1), acrolein (up to 10 mg day-1) and diacetyl (up to 0.5 mg day-1), at levels that exceeded U.S. occupational limits. Formaldehyde intake from 100 daily puffs was higher than the amount inhaled by a smoker consuming 10 conventional cigarettes per day. Secondhand exposures were predicted for two typical indoor scenarios: a home and a bar. Contributions from vaping to air pollutant concentrations in the home did not exceed the California OEHHA 8-h reference exposure levels (RELs), except when a high emitting device was used at 4.8 V. In that extreme scenario, the contributions from vaping amounted to as much as 12 µg m-3 formaldehyde and 2.6 µg m-3 acrolein. Pollutant concentrations in bars were modeled using indoor volumes, air exchange rates and the number of hourly users reported in the literature for U.S. bars in which smoking was allowed. Predicted contributions to indoor air levels were higher than those in the residential scenario. Formaldehyde (on average 135 µg m-3) and acrolein (28 µg m-3) exceeded the acute 1-h exposure REL for the highest emitting vaporizer/voltage combination. Predictions for these compounds also exceeded the 8-h REL in several bars when less intense vaping conditions were considered. Benzene concentrations in a few bars approached the 8-h REL, and diacetyl levels were close to the lower limit for occupational exposures. The integrated health damage from passive vaping was derived by computing disability-adjusted life years (DALYs) lost due to exposure to secondhand vapor. Acrolein was the dominant contributor to the aggregate harm. DALYs for the various device/voltage combinations were lower than-or comparable to-those estimated for exposures to secondhand and thirdhand tobacco smoke.

Preservatives in Personal Hygiene and Cosmetic Products, Topical Medications, and Household Cleaners in Spain. / Conservantes en productos de higiene y cosméticos, medicamentos tópicos y productos de limpieza doméstica en España.

INTRODUCTION: Preservatives are added to cosmetic, household cleaning, and other industrial products to prevent the growth of microorganisms. Unfortunately, exposure to these substances can cause sensitization. MATERIAL AND METHODS: Between January and June 2015, we analyzed the ingredients of 2300 products commercially available in Spain to identify the frequency of a wide variety of preservatives in different product categories. We analyzed 1093 skin care and cosmetic products sold exclusively in pharmacies (dermocosmetics), 458 household cleaning and personal hygiene and cosmetic products sold in supermarkets, 636 topical medications, and 113 cosmetic products sold in a herbal shop. RESULTS: Phenoxyethanol, citric acid, sodium benzoate, and potassium sorbate were very common in all the cosmetic product categories. Parabens were present in 16.1% of dermocosmetic products, 14.45% of cosmetic products available in supermarkets, 0.88% of cosmetic products available in the herbal shop, 5.18% of topical medications, and in none of the cleaning products. Isothiazolinones were identified in 2.56% of dermocosmetic products, 18% of cosmetic products in supermarkets, 7.9% of cosmetic products in the herbal shop, 63.63% of household cleaners, and in none of the topical medications. Formaldehyde releasers were detected in 5.76% of dermocosmetic products, 6.42% of cosmetic products sold in supermarkets, 7.96% of cosmetic products sold in the herbal shop, 3.93% of topical medications, and 16.74% of household cleaners. CONCLUSIONS: Evaluation of the presence of preservatives in everyday products allows us to indirectly estimate exposure levels to each one. Measures restricting the use of the most problematic preservatives need to be strengthened.

Controlling Indoor Air Pollution from Moxibustion.

Indoor air quality (IAQ) control of hospitals plays a critical role in protecting both hospital staffs and patients, particularly those who are highly susceptible to the adverse effects of indoor noxious hazards. However, moxibustion in outpatient departments (OPDs) of traditional Chinese medicine (TCM) may be a source of indoor air pollution in hospitals. Some studies have investigated indoor air pollution during moxibustion in Chinese medicine clinics (CMCs) and moxibustion rooms, demonstrating elevated air pollutants that pose a threat to the health of medical staff and patients. Our study investigated the indoor air pollutants of indoor carbon dioxide (CO2), carbon monoxide (CO), formaldehyde (HCHO), total volatile organic compounds (TVOCs), airborne particulate matter with a diameter of ≤10 µm (PM10) and ≤2.5 µm (PM2.5) during moxibustion in an acupuncture and moxibustion room of the OPD in a hospital in Taipei. To evaluate the different control strategies for indoor air pollution from moxibution, a comparison of air pollutants during moxibution among the methods of using alternative old moxa wools, local exhaust ventilation and an air cleaner was conducted. In this study, burning alternative old moxa wools for moxibustion obviously reduced all gaseous pollutants except for aerosols comparing burning fresh moxa wools. Using local exhaust ventilation reduced most of the aerosols after burning moxa. We also found that using an air cleaner was inefficient for controlling indoor air pollutants, particularly gaseous pollutants. Therefore, combining replacing alternative old moxa wools and local exhaust ventilation could be a suitable design for controlling indoor air pollution during moxibustion therapy.

Nicotine levels and presence of selected tobacco-derived toxins in tobacco flavoured electronic cigarette refill liquids.

BACKGROUND: Some electronic cigarette (EC) liquids of tobacco flavour contain extracts of cured tobacco leaves produced by a process of solvent extraction and steeping. These are commonly called Natural Extract of Tobacco (NET) liquids. The purpose of the study was to evaluate nicotine levels and the presence of tobacco-derived toxins in tobacco-flavoured conventional and NET liquids. METHODS: Twenty-one samples (10 conventional and 11 NET liquids) were obtained from the US and Greek market. Nicotine levels were measured and compared with labelled values. The levels of tobacco-derived chemicals were compared with literature data on tobacco products. RESULTS: Twelve samples had nicotine levels within 10% of the labelled value. Inconsistency ranged from -21% to 22.1%, with no difference observed between conventional and NET liquids. Tobacco-specific nitrosamines (TSNAs) were present in all samples at ng/mL levels. Nitrates were present almost exclusively in NET liquids. Acetaldehyde was present predominantly in conventional liquids while formaldehyde was detected in almost all EC liquids at trace levels. Phenols were present in trace amounts, mostly in NET liquids. Total TSNAs and nitrate, which are derived from the tobacco plant, were present at levels 200-300 times lower in 1 mL of NET liquids compared to 1 gram of tobacco products. CONCLUSIONS: NET liquids contained higher levels of phenols and nitrates, but lower levels of acetaldehyde compared to conventional EC liquids. The lower levels of tobacco-derived toxins found in NET liquids compared to tobacco products indicate that the extraction process used to make these products did not transfer a significant amount of toxins to the NET. Overall, all EC liquids contained far lower (by 2-3 orders of magnitude) levels of the tobacco-derived toxins compared to tobacco products.

Human exposure to airborne aldehydes in Chinese medicine clinics during moxibustion therapy and its impact on risks to health.

Many air toxicants, and especially aldehydes, are generated by moxibustion, which means burning Artemisia argyi. Our goal was to investigate indoor-air aldehyde emissions in Chinese medicine clinics (CMCs) during moxibustion to further evaluate the potential health risks, including cancer risk and non-cancer risk, to the medical staff and adult patients. First, the indoor-air-quality in 60 public sites, including 15 CMCs, was investigated. Four CMCs with frequent use of moxibustion were selected from the 15 CMCs to gather the indoor airborne aldehydes in the waiting and therapy rooms. The mean values of formaldehyde and acetaldehyde in the CMCs' indoor air were 654 and 4230 µg m(-3), respectively, in the therapy rooms, and 155 and 850 µg m(-3), respectively, in the waiting rooms. The average lifetime cancer risks (Rs) and non-cancer risks (hazard quotients: HQs) of airborne formaldehyde and acetaldehyde among the CMC medical staff exceeded the acceptable criteria (R < 1.00 × 10(-3) and HQ < 1.00) for occupational workers. The patients' Rs and HQs were also slightly higher than the critical values (R = 1.00 × 10(-6) and HQ = 1.00). Our results indicate that airborne aldehydes pose a significant threat to the health of medical staff, and slightly affected the patients' health, during moxibustion in the CMCs.

Characteristics of selected indoor air pollutants from moxibustion.

Concentrations and risk of monoaromatic hydrocarbons (MAHC), formaldehyde (HCHO), and polycyclic aromatic hydrocarbons (PAHs) in two moxibustion rooms were determined. The mean concentrations of MAHC, HCHO and PAHs were 535.2 µg/m(3), 157.9 µg/m(3) and 12.86µg/m(3), respectively, with notable health risks, indicating relatively serious pollution in indoor air due to the use of burning moxa. The indoor emissions of target pollutants from burning moxa in test chamber were also investigated. Toluene, benzene and xylene appeared to be dominant MAHCs, and naphthalene (NA) the dominant PAH, which were consistent with the pollution levels of the detected moxibustion rooms. The emission characteristics of smoky moxa and mild moxa were much in common and relatively close to that of tobacco; while that of smoke-free moxa showed a distinction. Though pollutants emission patterns varied within the three types of moxa, all of them had apparently higher emission intensities than other typical indoor sources, including tobacco. The results of this study can offer some references during the selection of moxa sticks and application of moxibustion.

Assessment of indoor airborne contamination in a wastewater treatment plant.

The main objective of this work was to quantify and characterize the major indoor air contaminants present in different stages of a municipal WWTP, including microorganisms (bacteria and fungi), carbon dioxide, carbon monoxide, hydrogen sulfide ammonia, formaldehyde, and volatile organic compounds (VOCs). In general, the total bacteria concentration was found to vary from 60 to >52,560 colony-forming units (CFU)/m(3), and the total fungi concentration ranged from 369 to 14,068 CFU/m(3). Generally, Gram-positive bacteria were observed in higher number than Gram-negative bacteria. CO(2) concentration ranged from 251 to 9,710 ppm, and CO concentration was either not detected or presented a level of 1 ppm. H(2)S concentration ranged from 0.1 to 6.0 ppm. NH(3) concentration was <2 ppm in most samples. Formaldehyde was <0.01 ppm at all sampling sites. The total VOC concentration ranged from 36 to 1,724 µg/m(3). Among the VOCs, toluene presented the highest concentration. Results point to indoor/outdoor ratios higher than one. In general, the highest levels of airborne contaminants were detected at the primary treatment (SEDIPAC 3D), secondary sedimentation, and sludge dehydration. At most sampling sites, the concentrations of airborne contaminants were below the occupational exposure limits (OELs) for all the campaigns. However, a few contaminants were above OELs in some sampling sites.

NORMACAT project: normalized closed chamber tests for evaluation of photocatalytic VOC treatment in indoor air and formaldehyde determination.

BACKGROUND, AIM: The aims of the NORMACAT project are: to develop tools and unbiased standardized methods to measure the performance and to validate the safety of new materials and systems integrating photocatalysis, to develop new photocatalytic media with higher efficiency and to give recommendations aimed at improving the tested materials and systems. METHOD: To achieve this objective, it was necessary to design standardized test benches and protocols to assess photocatalytic efficiency of materials or systems used in the treatment of volatile organic compounds (VOCs) and odour under conditions close to applications. The tests are based on the validation of robust analytical methods at the parts per billion by volume level that not only follow the disappearance of the initial VOCs but also identify the secondary species and calculate the mineralization rates. RESULTS: The first results of inter-laboratory closed chamber tests, according to XP B44-013 AFNOR standard, are described. The photocatalytic degradation of mixtures of several defined pollutants under controlled conditions (temperature, relative humidity, initial concentration) was carried out in two independent laboratories with the same photocatalytic device and with various analytical procedures. Comparison of the degradation rate and of the mineralization efficiency allowed the determination of the clean air delivery rate in both cases. Formaldehyde was the only by-product detected during photocatalytic test under standardized experimental conditions. The concentration of transient formaldehyde varied according to the initial VOC concentration. Moreover the photocatalytic reaction rate of formaldehyde in mixture with other pollutants was analysed. It was concluded that formaldehyde concentration did not increase with time. CONCLUSION-PERSPECTIVE: This type of experiment should allow the comparison of the performances of different photoreactors and of photocatalytic media under controlled and reproducible conditions against mixtures of pollutants including formaldehyde.

Influence of a portable air treatment unit on health-related quality indicators of indoor air in a classroom.

During periods of two weeks in February and June 2010 the performance of portable air treatment units (PATUs) was evaluated in a primary school classroom using indicators of indoor air quality. Air samples were collected in an undisturbed setting on weekend days and in an occupied setting during teaching hours. In the first week PATUs were turned off and in the second week they were turned on. On weekend days PATUs reduced indoor levels of PM-10 by 87% in February and by 70% in June compared to weekend days when PATUs were turned off. On schooldays, indoor PM-10 was increased by 6% in February and reduced by 42% in June. For PM-2.5 reductions on weekend days were 89% in February and 80% in June. On school days PM-2.5 was increased by 15% in February and reduced by 83% in June. Turning on the PATUs reduced total VOC by 80% on weekend days and by 57% on school days (but not in June). No influence on formaldehyde, NO(2), O(3) and molds was observed. PATUs appeared to be less effective in removal of air pollutants when used in an occupied classroom compared to an unoccupied setting. Our study suggests that such devices should be tested in real-life settings to evaluate their influence on indoor air quality.

The roles of various plasma species in the plasma and plasma-catalytic removal of low-concentration formaldehyde in air.

The contributions of various plasma species to the removal of low-concentration formaldehyde (HCHO) in air by DC corona discharge plasma in the presence and absence of downstream MnO(x)/Al(2)O(3) catalyst were systematically investigated in this study. Experimental results show that HCHO can be removed not only by short-living active species in the discharge zone, but also by long-living species except O(3) downstream the plasma reactor. O(3) on its own is incapable of removing HCHO in the gas phase but when combined with the MnO(x)/Al(2)O(3) catalyst, considerable HCHO conversion is seen, well explaining the greatly enhanced HCHO removal by combining plasma with catalysis. The plasma-catalysis hybrid process where HCHO is introduced through the discharge zone and then the catalyst bed exhibits the highest energy efficiency concerning HCHO conversion, due to the best use of plasma-generated active species in a two-stage HCHO destruction process. Moreover, the presence of downstream MnO(x)/Al(2)O(3) catalyst significantly reduced the emission of discharge byproducts (O(3)) and organic intermediates (HCOOH).

Physicochemical characteristics and pollen spectra of organic and non-organic honey samples of Apis mellifera L.

The aim of this research was to analyze and compare 17 honey samples, 11 organic and six non-organic Apis mellifera honey. The samples were analyzed concerning moisture, hydroxymethylfurfural, diastase index, water activity, color, total sugar, reducing sugar, sucrose, ash, viscosity, electrical conductivity, pH, acidity, and formol index. With the exception of acidity, reducing sugar and diastase index, the averages of other parameters were different between the two groups. All samples of organic honey presented moisture values between 23.50 and 24.40 percent. Among the nonorganic honey samples, two presented apparent sucrose amount upper the maximum limit established by the Brazilian Legislation. According to the quantitative analysis of pollen sediments in the honey samples and frequency of pollen types in 17 honey samples, 41.20 percent were classified as unifioral, and the remainder as polifioral.

O objetivo deste trabalho foi analisar e comparar 17 amostras de Apis mellifera mel, sendo 11 orgânicos e seis não orgânicos. As amostras foram analisadas quanto à umidade, hidroximetilfurfural, índice de diastase, atividade de água, cor, açúcares totais, açúcares redutores, sacarose, cinzas, viscosidade, condutividade elétrica, pH, acidez e índice de formol. Com exceção da acidez, açúcar redutor e índice de diastase as médias dos demais parâmetros analisados diferiram entre os dois grupos. Todas as amostras de mel orgânico analisadas apresentaram valores de umidade entre 23,50 to 24,40 por cento. Das amostras de mel não orgânico analisadas, duas apresentaram quantidades de sacarose aparente acima do limite máximo estabelecido pela legislação brasileira. De acordo com as análises quantitativas dos sedimentos polínicos e a frequência dos tipos polínicos observados nas 17 amostras de mel analisadas, 41,20 por cento foram classificadas como monofloral e o restante como polifloral.